You can use the operator panel to perform the following activities: To view the cartridge inventory: Robot The element address of the robot. Refer to your cartridge packaging for instructions for setting the write-protect switch. The Count value indicates the number of robots.
|Date Added:||2 August 2009|
|File Size:||42.78 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The password is disabled.
Exabyte 110L Plus – tape autoloader – LTO Ultrium – SCSI Series
The robot tries to scan a bar code several times before it logs a failure. Important Two power cords are shipped with the autoloader: To view tape drive information: Type dump and press Enter. In the Flash screen, type loadimage and press Enter. A cleaning cartridge is installed in the appropriate slot see page Use the up or down arrow keys to select one of the commands described in exabtte following tablethen press [ENTER].
If you want to stop sequential processing and resume from the first cartridge, select Next Cartridge from the Sequential Mode menu. Calibrating the Autoloader To calibrate the entire autoloader: You must install a terminator on the device at the physical end of each bus.
Total Puts The number of times the autoloader placed a cartridge in the element. Total Storage Capacity Compressed. An application can issue commands to the autoloader regardless of the control mode. Important The front door may be prevented from unlocking esabyte the autoloader application.
Use the up and down arrow keys to scroll through values. Insert the magazine into the autoloader so that the alignment guides are up as shown in Figure and the alignment grooves are down. Installation involves the following steps: Use the Clean Drive option described in this section and a cleaning cartridge stored in the autoloader to clean the drive when dxabyte autoloader or software notifies you to do so.
When cleaning is required, the autoloader displays a cleaning message on the Status screen. Click on the Unload button. Discussion threads can be closed at any time at our discretion.
The new control mode takes effect. Table Bar code label statistics Statistic Description Total Scans The number of times the robot scanned a bar code label. Ensure that the work area is free from conditions that could cause electrostatic discharge ESD.
Ideal for distributed networks and remote installations, the L is a compact alternative to stand alone LTO tape drives.
You do not need to switch to Console mode if you want to create diagnostic listings for technical support or upgrade firmware.
Retrospect: Storage Devices > Exabyte L Autoloader
For all other elements, the value is 0. An informational message appears, then the following screen appears. Top performance for a low price Top performance for a low price by Dong Ngo. Click on Interface information. The Command Menu provides options for performing specific robot movements.
Exabyte L Industrial Autoloader Tape Data Storage Network Backup Drive Module | eBay
Caution Do not attempt to perform exabte operations or power down the autoloader until after it automatically resets. If you have not already done so, install the software application on the host computer.
Shielded cables are required for this device to comply with FCC Rules.